Special: Dual 24" x 20' AS40 Conveyors

Sep 18, 2009

We recently designed and shipped a very large conveyor setup for a customer who was moving large stamped parts out of a press. Due to the width of the parts, a very wide conveyor was needed. Our solution was to mate two AS40 Automation Series Conveyors together in a gang driven configuration.
Read More →

Innovative InnerDrive Solution Featured in Metalforming Magazine

Sep 15, 2009

One of our distributors, TCR Integrated Stamping Systems, recently designed and installed a system for Polaris Industries in Osceola, WI. Their writeup of the solution was featured in the July/August '09 Metalforming Magazine.
Read More →

Specials: Flextrac Conveyor with Lexan Cover

Aug 31, 2009

In this case, we were asked by a pharmaceutical customer to design a Lexan cover that fits over the top of the conveyor to keep dust out. This cover is hinged to allow it to flip open for cleaning.
Read More →

Conveyor System with Custom Transfers

Jul 21, 2009

We often are asked to develop unique conveyor systems for customers. This particular system is unique in that the project consisted of three tiers. Parts would move in a loop on the lower two tiers and a takeaway conveyor would make up the top tier. 
Read More →

Two Specials in One

Jun 10, 2009

Today we shipped a set of AS40-CD conveyors that contained two unique modifications from our specials engineering department: a cutout in the frame and a gang drive system. Our customer requested the cutout to allow a robot arm to pass under the conveyor; even our normal low profile wasn't enough in this case.
Read More →

Automation Series Awarded "The Best of NED"

Jun 05, 2009

I'm excited to announce that QC Conveyors' new Automation Series low profile belt conveyor has received one of New Equipment Digest's Best of 2009 Awards.
Read More →

Nosebar Tail Now Available for Automation Series Conveyors

May 29, 2009

Our Automation Series Conveyors now have a new option available: a nosebar tail. This will allow for even better transfer of small parts between conveyors or other integrated machines.
Read More →

Under-frame Idlers for Long Conveyors

May 18, 2009

Our longest Automation Series conveyors feature under-frame idlers to prevent belt slack from hanging below the frame. Conveyors 6" wide or less receive partial-width idlers, while wider conveyors get a full-width idler that runs the entire width of the frame.
Read More →

Multi-Piece Frames for Wide Conveyors

May 08, 2009

The frames for our 2”–12” wide Automation Series conveyors are extruded from a single piece of aluminum, but for wider widths (18”, 21”, 24”) this wasn’t possible, so we designed a three-piece frame construction.
Read More →

American Made

Mar 04, 2009

At QC Conveyors, we can proudly say that all our conveyors are "American Made." More than 85% of the parts across all our conveyor lines are sourced domestically. In fact — as part of our efforts to keep our carbon footprint as small as possible — more than 60% of the parts are sourced within 100 miles of our headquarters.
Read More →

1 2 3 4 5 6 7 8 9 10

Request More Information

A first name is required.
A last name is required.
An email address is required.
Submit →

By submitting this information,
you are agreeing to our Privacy Policy.