Conveyor System with Custom Transfers > QC Conveyors > Blog

Blog


Conveyor System with Custom Transfers

Jul 21, 2009

crw_1370.jpg We often are asked to develop unique conveyor systems for customers. This particular system is unique in that the project consisted of three tiers. Parts would move in a loop on the lower two tiers and a takeaway conveyor would make up the top tier. Technicians would move the parts from tier to tier by hand as they completed their operations.

The system was based on our 125 Series belt conveyors, but incorporated some custom components and modifications. Due to the extended length of these conveyors, we replaced the standard tail with one that would allow us to add additional tension to the belts. The design was similar to the tail used on our Automation Series conveyorswithout the Tension Release components. You can see the modification in the photo below, taken during testing in our facility.

Additionally, we built custom transfer plates and a powered roller to help facilitate the turn at each end.

The short video below shows one level of the system in action during testing. As you can see, the parts transfer smoothly from conveyor to conveyor as they move around the loop.

Posted in Blog

Request More Information

A first name is required.
A last name is required.
An email address is required.
Submit →

By submitting this information,
you are agreeing to our Privacy Policy.